Shape modeling is fundamental to the analysis of dynamic environment and motion around asteroid. Chang＇E- 2 successfully made a flyby of Asteroid 4179 Toutatis and obtained plenty of high-resolution images during the mis- sion. In this paper, the modeling method and preliminary model of Asteroid Toutatis are discussed. First, the optical images obtained by Chang＇E-2 are analyzed. Terrain and silhouette features in images are described. Then, the modeling method based on previous radar model and preliminary information from optical images is proposed. A preliminary polyhedron model of Asteroid Toutatis is established. Finally, the spherical harmonic coefficients of Asteroid Toutatis based on the polyhedron model are obtained. Some parameters of model are analyzed and compared. Although the model proposed in this paper is only a preliminary model, this work offers a valuable reference for future high-resolution models. 相似文献
A novel method based on plastic processing and equipment for preparing ultra-fine metal fibers and particles is reported. With this new method, metal fibers and particles can both be produced on the same equipment and the surfaces of the fibers and particles can be protected from oxidation by the polymers or solvents during the preparation process. Metal-alloy powders with lower melt point were filled into polymer by an extruder, followed by a die-drawing process at a temperature lower than the melt temperature of the metal alloy. Metal fibers or particles were obtained after the polymer matrix was washed away. Metal alloy fibers can be obtained when a polymer that strongly interacts with metal alloy, such as a special polyvinyl alcohol with a low alcoholysis degree, is used as the polymer matrix. Metal-alloy particles can be obtained when a polymer with weak interaction with metal alloy, such as polyethylene (PE), is used as the polymer matrix. Based on the principle of this new method, it is possible to produce finer or even nano-sized metal fibers and particles with higher melting points. 相似文献
Tin (Sn) has been considered as an attractive anode material for sodium-ion batteries (SIBs) due to its high theoretical capacity (847 mAh g?1). Nevertheless, its low conductivity and large volume change during cycling essentially prevent the possibility of high capacity and long-term cycle for SIBs. In this work, Sn nanoparticles are well embedded into the highly ordered mesoporous carbon (CMK-3) matrix (Sn@CMK-3) using a facile sonochemical method combined with heat treatment. The resultant Sn@CMK-3 nanohybrid electrode delivers an initial charge capacity of 412 mAh g?1 at 100 mA g?1. A reversible capacity of 337 mAh g?1 is obtained after 200 cycles, indicating the good cycle stability of the nanohybrid structure. The electrode also shows a potential rate capability, which maintains a capacity of 228 mAh g?1 at 1000 mA g?1. When the current density returns to 50 mA g?1, the capacity goes back to 381 mAh g?1, with a capacity retention of 86.9%. The enhanced sodium storage performance of Sn@CMK-3 nanohybrid can be related to the synergistic effect between CMK-3 and Sn.
Graphical abstract Sn@CMK-3 nanohybrid with Sn nanoparticles uniformly distributed into the highly ordered mesoporous carbon matrix exhibited good cycling performance and rate capability.
